ADD THE SLIDER CODE HERE

Search...

Showing posts with label party. Show all posts
Showing posts with label party. Show all posts

2.7.12

DIY: Pinweel / Rehilete









Materiales:
-Tabla de corte
-Regla
-Tijeras o exacto
-Alfileres
-Lápiz
-Impresión y/o papel con diseño por ambos lados
-Plantilla (Descarga gratis aquí)

Paso 1: Cortar la Plantilla
Imprime la plantilla del rehilete aquí. Puedes imprimir un diseño en cada lado de la hoja o comprar un papel que este impreso por ambos lados.Coloca la plantilla sobre la hoja con diseño, recorta todos los lados hasta obtener un cuadrado. Después corta las líneas diagonales para formar las aletas del rehilete. De una hoja tamaño carta salen 2 rehiletes.

Paso 2: Doblar las Aletas
Una vez que tienes el rehilete cortado con las aletas. Dobla las esquinas en forma paralela a los cortes. Dobla de manera que queden un poco mas allá del centro del rehilete.

Paso 3: Sujetar el Rehilete
Toma un alfiler con cabeza y realiza un agujero a través de cada extremo de las aletas. Junta todos los extremos y pasa el alfiler para sujetarlas, la cabeza deberá quedar al frente. Empuja la punta del alfiler sobre la goma de borrar del lápiz. Prueba que el rehilete gire, saca el alfiler, con ayuda de las tejeras quita la punta y vuelve a insertarlo sobre la goma. Puedes colocar un poco de pegamento sobre el alfiler para sujetarlo mejor a la goma de borrar.

Paso 4: Listo!!
Con solo esto tres pasos puedes elaborar estos fantásticos rehiletes. Elabora cuantos quieras y utilízalos para decorar tus fiestas, para asignar asientos o como un regalo.

Materials:

-Cutting board
-Rule
-Scissors or exacto knife
-Pins
-Pencil
-Printing or patterned paper on both sides
-Template (free download here)

Step 1: Cut the Template
Print the pinwheel template here. You can print a design on each side of your sheet or buy a paper printed on both sides. Place the template on the paper, cut around edges to obtain a square. Then cut diagonal lines to form pinwheel flaps.  The template fits two squares per letter page.

Step 2: Fold the Flaps
Once you have cut the pinwheel 
flaps. Fold your flaps parallel with the cut. Make sure the end reaches beyond the middle of the pinwheel. 

Step 3: Hold the  Pinwheel 
Take a pin with head and poke a hole through the end of each flaps. Put together all the ends and pass the pin to hold them, the head should be in front.  Push pin through the eraser of a pencil.  Test the pinwheel for pin length, then cut off the sharp point with scissors or wire cutters. 
Push the now dull edge of the pin flush with the eraser. You can put some glue on the pin to attach better to the eraser.

Step 4: Ready!
With just three steps you can make these fantastic pinwheel. Make as many you want and use them to decorate your party, to assign seats or as a gift.


Enjoy!!
Hola Ático

25.5.12

DIY: String Heart






Via Green Wedding Shoes


Materiales:
-Una pieza de madera 
-Cuerda, hilo o lana
-Martillo y Clavos con cabeza
-Pintura en spray
-Figura dibujada o impresa sobre papel

Paso 1:  Preparar la base
Utilizando la pintura en aerosol da el color de fondo deseado a la pieza de madera. En el ejemplo se utilizo gris oscuro, para que el color rosa realmente resaltara.

Paso 2: Transferir el diseño
Una vez que la pintura esté seca, coloca el papel con el diseño deseado sobre la pieza de madera, utiliza un poco de cinta para mantenerla en su lugar. Con ayuda del martillo, coloca en todo el rededor de la figura los clavos, dejan un dedo entre cada uno. Al terminar, retira con cuidado el papel.

Paso 3: Colocar la cuerda
Ahora la parte divertida! Realiza un nudo alrededor de la cabeza de uno de los clavos. Manteniendo firme la cuerda comienza a pasarla de un lado a otro, hasta que te guste el patrón que has creado. No existe una manera correcta o incorrecta de hacerlo, solo debes asegurarte que la cuerda quede bien sujeta a cada clavo.

Materials:
-A piece of wood
-Rope, string or wool
-Hammer and Nail-head
-Spray-Painting
-Figure drawn or printed on paper

Step 1: Prepare the base
Using spray paint gives the desired background color to the piece of wood. In the example they use dark gray for the color pink really highlighted.

Step 2: Transfer the design
Once the paint is dry, place the paper with the desired pattern on the piece of wood, use some tape to hold it in place. Using the hammer,  placed all around the figure the nails, spacing the nails about one finger apart.  When finished, carefully remove the paper.

Step 3: Place the string
Now the fun part! Make a knot around the head of a nail. Holding the string starts to pass from one side to another, until you like the pattern you've created. There is no right or wrong way to do it, you just have to make sure the string is securely fastened to each nail.

Enjoy!!
Hola Ático

18.5.12

Bonbon Balloons




Web

Bonbon es una empresa de globos con sede en el norte de Londres. Bonbon Ballons vienen en un arco iris de colores. Cada globo trae un hermoso cordón que ha sido decorado a mano. Pueden ser diseñados de forma individual por lo que son diseños únicos para ti o tu destinatario. Puedes enviar un globo de Bonbon como regalo para cualquier ocasión. Cuando llegue a su destino, flotará hacia arriba fuera de la caja, las cuerdas llevaran un mensaje especial personalizado en ellas. También ofrecen un servicio de diseño a medida para eventos privados como bodas, fiestas, instalaciones de pop-up y eventos corporativos. Su concepto es crear algo especial que te hará sonreír a ti y a los demás, al mismo tiempo son un detalle hermoso en cualquier entorno.

Bonbon is a balloon company based in North London. Bonbon Balloons come in a rainbow of colours. Each balloon has a beautiful decorative string that has been hand crafted. On request they can also be individually designed so they’re unique to you or your recipient. You can send a bonbon balloon as a gift for any occasion. On arrival it will float up out of the box and the strings will carry your own specially personalised message. They also offer a bespoke design service for private events such as weddings, parties, pop up installations and corporate events. Their concept is to create something special that will make you and others smile, whilst being a beautiful feature in any surrounding.

Enjoy!!
Hola Ático
Related Posts Plugin for WordPress, Blogger...