Materiales:
-Una pieza de madera
-Cuerda, hilo o lana
-Martillo y Clavos con cabeza
-Pintura en spray
-Figura dibujada o impresa sobre papel
Paso 1: Preparar la base
Utilizando la pintura en aerosol da el color de fondo deseado a la pieza de madera. En el ejemplo se utilizo gris oscuro, para que el color rosa realmente resaltara.
Paso 2: Transferir el diseño
Una vez que la pintura esté seca, coloca el papel con el diseño deseado sobre la pieza de madera, utiliza un poco de cinta para mantenerla en su lugar. Con ayuda del martillo, coloca en todo el rededor de la figura los clavos, dejan un dedo entre cada uno. Al terminar, retira con cuidado el papel.
Paso 3: Colocar la cuerda
Ahora la parte divertida! Realiza un nudo alrededor de la cabeza de uno de los clavos. Manteniendo firme la cuerda comienza a pasarla de un lado a otro, hasta que te guste el patrón que has creado. No existe una manera correcta o incorrecta de hacerlo, solo debes asegurarte que la cuerda quede bien sujeta a cada clavo.
Materials:
-A piece of wood
-Rope, string or wool
-Hammer and Nail-head
-Spray-Painting
-Figure drawn or printed on paper
Step 1: Prepare the base
Using spray paint gives the desired background color to the piece of wood. In the example they use dark gray for the color pink really highlighted.
Step 2: Transfer the design
Once the paint is dry, place the paper with the desired pattern on the piece of wood, use some tape to hold it in place. Using the hammer, placed all around the figure the nails, spacing the nails about one finger apart. When finished, carefully remove the paper.
Step 3: Place the string
Now the fun part! Make a knot around the head of a nail. Holding the string starts to pass from one side to another, until you like the pattern you've created. There is no right or wrong way to do it, you just have to make sure the string is securely fastened to each nail.
-A piece of wood
-Rope, string or wool
-Hammer and Nail-head
-Spray-Painting
-Figure drawn or printed on paper
Step 1: Prepare the base
Using spray paint gives the desired background color to the piece of wood. In the example they use dark gray for the color pink really highlighted.
Step 2: Transfer the design
Once the paint is dry, place the paper with the desired pattern on the piece of wood, use some tape to hold it in place. Using the hammer, placed all around the figure the nails, spacing the nails about one finger apart. When finished, carefully remove the paper.
Step 3: Place the string
Now the fun part! Make a knot around the head of a nail. Holding the string starts to pass from one side to another, until you like the pattern you've created. There is no right or wrong way to do it, you just have to make sure the string is securely fastened to each nail.
Enjoy!!
Hola Ático
Hola Ático
No comments:
Post a Comment